Kraken Scales - Blast DLC

Kraken Scales - Blast DLC

It's almost the same look as the classy default blast scales but with a bit smaller grit sand to blast the titanium scales and most importantly, DLC coated.

DLC in Piratech Standard, we call it 'Stubborn DLC'

This standard of DLC coating was tested and found by Piratech.

What's different and good about this type of DLC?

1. Ware and corruption resistance
2. Thin coating film
3. Light-black color

• Ware and corruption resistance

It's been tested that the TC4 titanium, which is at around 32-36 HRC, can withstand scratching multiple times from S90V at around 61-62 HRC cutting edge after being coated with this Stubborn DLC. (See video.) (The Video is just for testing; please do not do this at home on purpose.)

• Thin coating film

The DLC film is around 2 μm, thinner than most of the DLC on the market. The thinner it could get the more detail of the substrate could show. With this Stubborn DLC, we could make the blast titanium scales show almost the same color as it before coating.

• Light-black color

The color of this DLC coating is a bit like light gray to light dark. It's not completely black but with some transparency which makes it look more gorgeous than total black.

SPECS.

• Handle length: 4.41"/112.02mm
• Handle width: 1.02"/25.96mm
• Material: Titanium 
• Finish: 220 grit blast & DLC
  
• Weight: 50g/1.76oz 

Package contains:

1. A pair of titanium scales (with eight magnets)
2. One piece of titanium filler
3. One titanium milled clip